Search results
Results from the Health.Zone Content Network
The Dynamic Host Configuration Protocol (DHCP) is a network management protocol used on Internet Protocol (IP) networks for automatically assigning IP addresses and other communication parameters to devices connected to the network using a client–server architecture. [1]
t. e. The Dynamic Host Configuration Protocol version 6 (DHCPv6) is a network protocol for configuring Internet Protocol version 6 (IPv6) hosts with IP addresses, IP prefixes, default route, local segment MTU, and other configuration data required to operate in an IPv6 network. It is not just the IPv6 equivalent of the Dynamic Host ...
Server BOOTP DHCP DHCPv6 Other Load balancing Failover dhcpy6d No No Yes PXE, Dynamic DNS: Yes Yes dnsmasq Yes Yes Yes PXE, TFTP: No No ISC DHCP Yes Yes Yes Dynamic DNS [10] [11] ...
[1]: 1.9 Therefore, hosts search for a DHCP server on the network before assigning link-local addresses. In the automatic address configuration process, network hosts select a random candidate address within the reserved range and use Address Resolution Protocol (ARP) probes to ascertain that the address is not in use on the network. If a reply ...
Zero-configuration networking. Zero-configuration networking (zeroconf) is a set of technologies that automatically creates a usable computer network based on the Internet Protocol Suite (TCP/IP) when computers or network peripherals are interconnected. It does not require manual operator intervention or special configuration servers.
Internet Connection Sharing (ICS) is a Windows service that enables one Internet -connected computer to share its Internet connection with other computers on a local area network (LAN). The computer that shares its Internet connection serves as a gateway device, meaning that all traffic between other computers and the Internet go through this ...
The DHCP server will reserve an IP address (so anyone else asking for one is not granted this one) and it will send that IP address to the device along with a lease identifying how long the address will be valid. Normally, from this point, the device will respond by confirming the IP address with the DHCP server and the DHCP server finally ...
Kea is an open-source DHCP server developed by the Internet Systems Consortium, authors of ISC DHCP, also known as DHCPd. Kea and ISC DHCP are both implementations of the Dynamic Host Configuration Protocol, a set of standards established by the Internet Engineering Task Force (IETF). Kea software is distributed in source code form on GitHub ...