Search results
Results from the Health.Zone Content Network
bits 4–7: Used to indicate the format of the user channel word; Byte 2: Audio word length bits 0–2: Aux bits usage. This indicates how the aux bits (time slots 4–7) are used. Generally set to 000 2 (unused) or 001 2 (used for 24-bit audio data). bits 3–5: Word length. Specifies the sample size, relative to the 20- or 24-bit maximum.
This result has been further improved to 2 126.0 for AES-128, 2 189.9 for AES-192 and 2 254.3 for AES-256, which are the current best results in key recovery attack against AES. This is a very small gain, as a 126-bit key (instead of 128 bits) would still take billions of years to brute force on current and foreseeable hardware.
Advanced Encryption Standard process. The Advanced Encryption Standard (AES), the symmetric block cipher ratified as a standard by National Institute of Standards and Technology of the United States (NIST), was chosen using a process lasting from 1997 to 2000 that was markedly more open and transparent than its predecessor, the Data Encryption ...
AES-256 A byte-oriented portable AES-256 implementation in C. Solaris Cryptographic Framework offers multiple implementations, with kernel providers for hardware acceleration on x86 (using the Intel AES instruction set) and on SPARC (using the SPARC AES instruction set). It is available in Solaris and derivatives, as of Solaris 10.
S/PDIF ( Sony/Philips Digital Interface) [1] [2] is a type of digital audio interface used in consumer audio equipment to output audio over relatively short distances. The signal is transmitted over either a coaxial cable using RCA or BNC connectors, or a fibre-optic cable using TOSLINK connectors. S/PDIF interconnects components in home ...
ADAT Lightpipe. The ADAT Lightpipe, officially the ADAT Optical Interface, is a standard for the transfer of digital audio between equipment. It was originally developed by Alesis but has since become widely accepted, [1] with many third party hardware manufacturers including Lightpipe interfaces on their equipment.
AES3 uses 4 bytes per sample (24 bits of sample plus the optional data byte), but AES47 supports additional formats. The optional data byte contains four "ancillary" bits corresponding to the AES3 VUCP bits. However, the P (parity) bit is replaced by a B bit which is set on the first sample of each audio block, and clear at all other times.
The bit clock frequency is the product of the sample rate, the number of bits per channel and the number of channels. So, for example, CD Audio with a sample frequency of 44.1 kHz, with 16 bits of precision and two channels (stereo) has a bit clock frequency of: 44.1 kHz × 16 × 2 = 1.4112 MHz