Ads
related to: additive manufacturing journal
Search results
Results from the Health.Zone Content Network
Design for additive manufacturing (DfAM or DFAM) is design for manufacturability as applied to additive manufacturing (AM). It is a general type of design methods or tools whereby functional performance and/or other key product life-cycle considerations such as manufacturability, reliability, and cost can be optimized subjected to the capabilities of additive manufacturing technologies.
3D printing or additive manufacturing is the construction of a three-dimensional object from a CAD model or a digital 3D model. It can be done in a variety of processes in which material is deposited, joined or solidified under computer control, with the material being added together (such as plastics, liquids or powder grains being fused), typically layer by layer.
Fused filament fabrication ( FFF ), also known as fused deposition modeling (with the trademarked acronym FDM ), or filament freeform fabrication, is a 3D printing process that uses a continuous filament of a thermoplastic material. [1] Filament is fed from a large spool through a moving, heated printer extruder head, and is deposited on the ...
Electron-beam additive manufacturing, or electron-beam melting ( EBM) is a type of additive manufacturing, or 3D printing, for metal parts. The raw material (metal powder or wire) is placed under a vacuum and fused together from heating by an electron beam. This technique is distinct from selective laser sintering as the raw material fuses have ...
3D printing processes. Computer-Aided Design (CAD) model used for 3D printing. The manual modeling process of preparing geometric data for 3D computer graphics is similar to plastic arts such as sculpting. 3D scanning is a process of collecting digital data on the shape and appearance of a real object, creating a digital model based on it.
Selective laser melting ( SLM) is one of many proprietary names [1] for a metal additive manufacturing (AM) technology that uses a bed of powder with a source of heat to create metal parts. Also known as direct metal laser sintering ( DMLS ), the ASTM standard term is powder bed fusion ( PBF ). PBF is a rapid prototyping, 3D printing, or ...
Ian Gibson (born April 7, 1963) is a Professor of Design Engineering at the University of Twente. Gibson was selected as the scientific director of Fraunhofer Project Center at the University of Twente [1] [2] and is a recipient of lifetime achievement award, the Freeform and Additive Manufacturing Award. [3] [4] His main areas of research are ...
Cold spray additive manufacturing (CSAM) (also called cold spray 3D printing) is a particular application of cold spraying, able to fabricate freestanding parts or to build features on existing components. During the process, fine powder particles are accelerated in a high-velocity compressed gas stream, and upon the impact on a substrate or ...
Ads
related to: additive manufacturing journal