Search results
Results from the Health.Zone Content Network
The WPS push button (center, blue) on a wireless router showing the symbol defined by the Wi-Fi Alliance for this function. Wi-Fi Protected Setup ( WPS) originally, Wi-Fi Simple Config, is a network security standard to create a secure wireless home network . Created by Cisco and introduced in 2006, the purpose of the protocol is to allow home ...
The Linksys WRT54G Wi-Fi series is a series of Wi-Fi –capable residential gateways marketed by Linksys, a subsidiary of Cisco, from 2003 until acquired by Belkin in 2013. A residential gateway connects a local area network (such as a home network) to a wide area network (such as the Internet ). Models in this series use one of various 32-bit ...
Wi-Fi Protected Access ( WPA ), Wi-Fi Protected Access 2 ( WPA2 ), and Wi-Fi Protected Access 3 ( WPA3) are the three security certification programs developed after 2000 by the Wi-Fi Alliance to secure wireless computer networks. The Alliance defined these in response to serious weaknesses researchers had found in the previous system, Wired ...
ARP vulnerabilities. The Address Resolution Protocol (ARP) is a widely used communications protocol for resolving Internet layer addresses into link layer addresses.. When an Internet Protocol (IP) datagram is sent from one host to another in a local area network, the destination IP address must be resolved to a MAC address for transmission via the data link layer.
The default username and password are usually found in the instruction manual (common for all devices) or on the device itself. [citation needed] Default passwords are one of the major contributing factors to large-scale compromises of home routers. [1] Leaving such a password on devices available to the public is a major security risk.
Wireless security is the prevention of unauthorized access or damage to computers or data using wireless networks, which include Wi-Fi networks. The term may also refer to the protection of the wireless network itself from adversaries seeking to damage the confidentiality, integrity, or availability of the network.
This Linksys WRT54GS, a combined router and Wi‑Fi access point, operates using the 802.11g standard in the 2.4 GHz ISM band using signalling rates up to 54 Mbit/s. For comparison, this Netgear product, a combined router and Wi‑Fi access point from 2013, uses the 802.11ac standard in the 5 GHz band, with signalling rates up to 6933 Mbit/s.