Search results
Results from the Health.Zone Content Network
Multiple Registration Protocol (MRP), which replaced Generic Attribute Registration Protocol (GARP), is a generic registration framework defined by the IEEE 802.1ak amendment to the IEEE 802.1Q standard.
The SCO Group's 2003 lawsuit against IBM, funded by Microsoft, claiming $5 billion in intellectual property infringements by the free software community, is an example of FUD, according to IBM, which argued in its counterclaim that SCO was spreading "fear, uncertainty, and doubt".
The most common form of black hole is simply an IP address that specifies a host machine that is not running or an address to which no host has been assigned.. Even though TCP/IP provides a means of communicating the delivery failure back to the sender via ICMP, traffic destined for such addresses is often just dropped.
The majority of modern Linux distributions come with a Linux kernel which has the Linux bonding driver integrated as a loadable kernel module and the ifenslave (if = [network] interface) user-level control program pre-installed. Donald Becker programmed the original Linux bonding driver.
EtherType is a two-octet field in an Ethernet frame.It is used to indicate which protocol is encapsulated in the payload of the frame and is used at the receiving end by the data link layer to determine how the payload is processed.
NAT64 is an IPv6 transition mechanism that facilitates communication between IPv6 and IPv4 hosts by using a form of network address translation (NAT). The NAT64 gateway is a translator between IPv4 and IPv6 protocols, [1] for which function it needs at least one IPv4 address and an IPv6 network segment comprising a 32-bit address space.
TCP window scale option is needed for efficient transfer of data when the bandwidth-delay product (BDP) is greater than 64 KB [1].For instance, if a T1 transmission line of 1.5 Mbit/s was used over a satellite link with a 513 millisecond round-trip time (RTT), the bandwidth-delay product is ,, =, bits or about 96,187 bytes.
Network address translation typically uses private IP addresses on private networks with a single public IP address for the router facing the Internet.The network address translator changes the source address in network protocols for outgoing requests from that of an internal device to its external address, so that internal devices can communicate with hosts on the external network, while ...