Health.Zone Web Search

Search results

1. Results from the Health.Zone Content Network

2. Lumber - Wikipedia

   en.wikipedia.org/wiki/Lumber

   For ceilings heights of 8, 9 or 10 feet (2.4, 2.7 or 3.0 m), studs are available in 92 + 5 ⁄ 8 inches (2.35 m), 104 + 5 ⁄ 8 inches (2.66 m), and 116 + 5 ⁄ 8 inches (2.96 m). [citation needed] North American softwoods. The length of a unit of dimensional lumber is limited by the height and girth of the tree it is milled from. In general ...

3. Board foot - Wikipedia

   en.wikipedia.org/wiki/Board_foot

   An example of planed lumber is softwood "two by four" lumber sold by large lumber retailers, nominally 2 by 4 inches (50 mm × 100 mm). The 2 × 4 is actually only 1 + 1 ⁄ 2 in × 3 + 1 ⁄ 2 in (38 mm × 89 mm), but the dimensions for the lumber when purchased wholesale could still be represented as full 2 × 4 lumber, although the "standard ...

4. Plank (wood) - Wikipedia

   en.wikipedia.org/wiki/Plank_(wood)

   In the United States, planks can be any length and are generally a minimum of 2×8 (1 + 1 ⁄ 2 in × 7 + 1 ⁄ 4 in or 38 mm × 184 mm), but planks that are 2×10 (1 + 1 ⁄ 2 in × 9 + 1 ⁄ 4 in or 38 mm × 235 mm) and 2×12 (1 + 1 ⁄ 2 in × 11 + 1 ⁄ 4 in or 38 mm × 286 mm) are more commonly stocked by lumber retailers.

5. Framing (construction) - Wikipedia

   en.wikipedia.org/wiki/Framing_(construction)

   Framing side by side units. The erection of a wooden frame in Sabah, Malaysia. Framing, in construction, is the fitting together of pieces to give a structure support and shape. [1] Framing materials are usually wood, engineered wood, or structural steel. The alternative to framed construction is generally called mass wall construction, where ...

6. Wall stud - Wikipedia

   en.wikipedia.org/wiki/Wall_stud

   In New Zealand, the required lumber size and spacing of wall studs are determined using NZS 3604 Timber-framed buildings table 8.2 for loadbearing walls and table 8.4 for non-loadbearing walls. Other terms. Studs are the vertical members of a timber- or metal-framed wall.

7. Real versus nominal value - Wikipedia

   en.wikipedia.org/wiki/Real_versus_nominal_value

   For example, dimensional lumber sizes such as "2 by 4" refers to a board whose finished dimensions are closer to 1 + 1 ⁄ 2 inches by 3 + 1 ⁄ 2 inches (1 + 3 ⁄ 4 inches by 3 + 3 ⁄ 4 inches is typical in the United Kingdom).

8. Parallel-strand lumber - Wikipedia

   en.wikipedia.org/wiki/Parallel-strand_lumber

   Parallel-strand lumber ( PSL) is a form of engineered wood made from parallel wood strands bonded together with adhesive. It is used for beams, headers, columns, and posts, among other uses. The strands in PSL are clipped veneer elements having a least dimension of not more than inch (6.4 mm) and an average length of at least 300 times this ...

9. Plywood - Wikipedia

   en.wikipedia.org/wiki/Plywood

   The most common dimension is 1.2 by 2.4 metres (3 ft 11 in × 7 ft 10 in) or the slightly larger imperial dimension of 4 feet × 8 feet. Plies vary in thickness from 1.4 mm to 4.3 mm. The number of plies—which is always odd—depends on the thickness and grade of the sheet. Roofing can use the thinner 16-millimetre (5 ⁄ 8 in) plywood.