Search results
Results from the Health.Zone Content Network
Byte 2: Audio word length bits 0–2: Aux bits usage. This indicates how the aux bits (time slots 4–7) are used. Generally set to 000 2 (unused) or 001 2 (used for 24-bit audio data). bits 3–5: Word length. Specifies the sample size, relative to the 20- or 24-bit maximum. Can specify 0, 1, 2 or 4 missing bits.
This result has been further improved to 2 126.0 for AES-128, 2 189.9 for AES-192 and 2 254.3 for AES-256, which are the current best results in key recovery attack against AES. This is a very small gain, as a 126-bit key (instead of 128 bits) would still take billions of years to brute force on current and foreseeable hardware.
AES47. AES47 is a standard which describes a method for transporting AES3 professional digital audio streams over Asynchronous Transfer Mode (ATM) networks. The Audio Engineering Society (AES) published AES47 in 2002. The method described by AES47 is also published by the International Electrotechnical Commission as IEC 62365.
Advanced Encryption Standard process. The Advanced Encryption Standard (AES), the symmetric block cipher ratified as a standard by National Institute of Standards and Technology of the United States (NIST), was chosen using a process lasting from 1997 to 2000 that was markedly more open and transparent than its predecessor, the Data Encryption ...
Dolby E logo. Dolby E is a lossy audio compression and decoding technology developed by Dolby Laboratories that allows 6 to 8 channels of audio to be compressed into an AES3 digital audio stream that can be stored as a standard stereo pair of digital audio tracks. Up to six channels, such as a 5.1 mix, can be recorded as 16-bit Dolby E data.
S/PDIF. S/PDIF ( Sony/Philips Digital Interface) [1] [2] is a type of digital audio interface used in consumer audio equipment to output audio over relatively short distances. The signal is transmitted over either a coaxial cable using RCA or BNC connectors, or a fiber-optic cable using TOSLINK connectors. S/PDIF interconnects components in ...
Instead, NRZI coding is used, where a 0 bit indicates no transition and a 1 bit is a transition. 8 audio samples at 24 bits per sample plus 4 user bits (196 bits total) are sent in groups of 4 data bits followed by a 1 bit to force a transition. This totals 196×5/4 = 245 bits. 10 consecutive 0 bits followed by a 1 bit provide frame ...
In digital audio electronics, a word clock or wordclock (sometimes sample clock, which can have a broader meaning) [further explanation needed] is a clock signal used to synchronise other devices, such as digital audio tape machines and compact disc players, which interconnect via digital audio signals. Word clock is so named because it clocks ...